Welcome to the official website of Fudiyuan Engineering Equipment (Henan) Co., Ltd!
Principles, Process Flow, and Operational Guidelines for High-Temperature Aerobic Sludge Fermentation Tanks
2026-10-26
Principles, Process Flow, and Operational Guidelines for High-Temperature Aerobic Sludge Fermentation Tanks
I. Core Operating Principle of the High-Temperature Aerobic Sludge Fermentation Tank
Multi‑stage high‑temperature aerobic fermentation tanks leverage the principles of microbial aerobic fermentation, using the organic matter in sludge as a nutrient substrate. By artificially controlling key parameters such as oxygen concentration, temperature, moisture content, and the carbon–nitrogen ratio within the fermentation system, these tanks activate mesophilic and thermophilic microbial communities, thereby achieving rapid decomposition, maturation, and stabilization of the sludge’s organic matter.
The equipment adopts Three-dimensional multilayer fermentation structure The vessel is vertically divided into an inlet pre‑fermentation zone, a high‑temperature main fermentation zone, and a maturation/cooling zone. Each of these multi‑layer chambers features independent temperature control and aeration, enabling gradient‑type fermentation for sludge treatment. An intelligent air‑injection system at the bottom and via agitator blades delivers sufficient oxygen to the feedstock, meeting the metabolic demands of aerobic microorganisms. During the microbial decomposition of organic matter, substantial bioheat is generated, rapidly raising the pile temperature into the high‑temperature range, thereby ensuring the complete inactivation of pathogenic bacteria, insect eggs, and weed seeds and achieving compliance with harmlessness standards.
Meanwhile, the built-in automatic mixing system continuously agitates the material, breaking up compacted layers and renewing its aeration pores, ensuring uniform oxygen diffusion and rapid moisture evaporation, thereby achieving simultaneous sludge volume reduction. During fermentation, high-molecular-weight organic matter is progressively degraded into humic substances, ultimately yielding a stable organic fertilizer feedstock and enabling the resourceful utilization of sludge. The entire tank operates in a sealed environment, with fermentation exhaust gases collected and treated centrally, effectively addressing the drawbacks of conventional composting—such as odor dispersion, uneven fermentation, and significant weather‑dependent variability.
II. Fermentation Process Mode: Continuous Fermentation Process
Multi-layer fermentation tanks employ Fully automatic continuous aerobic fermentation process , The workflow is as follows:
1. Continuous material inflow and outflow The system employs a quantitative, continuous feeding, layer-by-layer downward movement, and continuous discharge mode, with the feeding, fermentation, maturation, and discharge processes carried out simultaneously and without interruption.
2. Multilayer gradient continuous reaction : The multi-layer tank creates independent fermentation gradients: the upper layer receives fresh feed for pre‑fermentation and temperature rise; the middle layer is in the high‑temperature, pathogen‑inactivation core phase; and the lower layer completes cooling and maturation. Thus, materials in each layer are simultaneously at different stages of fermentation.
III. Cycles of Each Fermentation Stage
1. High-temperature fermentation period (the core stage of harmlessness):
After the material enters the middle-layer high-temperature fermentation chamber of the tank, it enters the thermophilic phase. Through microbial metabolism and heat accumulation, the material temperature is stably maintained at… 55–70°C , lasting 1–3 days. During this phase, continuous aeration and timed mixing thoroughly inactivate harmful pathogens such as Escherichia coli and Ascaris eggs in the sludge, achieving harmless treatment; at the same time, readily biodegradable organic matter is rapidly decomposed, generating substantial heat and evaporating free water from the sludge, thereby achieving preliminary volume reduction. This stage constitutes the core fermentation process, operating continuously without interruption throughout.
2. Cooling Period:
After high-temperature fermentation is completed, the material moves downward along the layered conveying system and enters the cooling phase. At this stage, the readily degradable organic matter has been largely consumed, microbial metabolic activity declines, and heat production decreases, causing the pile temperature to gradually drop from 70°C to 35–45°C over approximately one day. During this phase, aeration is maintained to sustain a slightly aerobic environment.
3. Post-ripening period:
After cooling is complete, the material is transferred to the lower maturation chamber of the tank for post‑maturation and stabilization, a process that lasts one day. During this phase, microorganisms carry out the thorough decomposition of any remaining recalcitrant organic matter, gradually forming humic substances. The sludge structure becomes increasingly loose and stable, its moisture content continues to decline, and the material achieves preliminary stabilization, thereby eliminating the risk of secondary putrefaction and meeting the requirements for semi‑finished product resource recovery.
4. Material Mixing Period: Scheduled Daily Operation
Stirring operations continue throughout the entire process, from the high-temperature phase through the cooling phase to the post-ripening phase. Turn evenly every day; stir for 3 minutes. , stop Duration 10 minutes. No fixed cycle with a specific number of days. The tank’s built-in stirring system evenly turns the compost mass, breaks up compaction, clears ventilation channels, and balances temperature, oxygen levels, and moisture distribution throughout the pile, thereby preventing localized anaerobiosis, overheating, and uneven fermentation, and ensuring consistent overall fermentation performance.
IV. Detailed Continuous Fermentation Process Flow and Operational Mode
1. Front-end preprocessing step
Dewatered sludge from the wastewater treatment plant (with a moisture content of approximately 80%) is conveyed to a storage silo, where conditioning agents are added to adjust the carbon-to-nitrogen ratio and porosity. After thorough mixing, the material is continuously and quantitatively fed via an automated feeding system into the top‑inlet chamber of a multi‑layer fermentation tank, thereby completing the feed pretreatment process.
2. Multi-layer tank gradient continuous fermentation process
First layer (top layer): Pre-fermentation warming layer : Newly received materials remain here for 1 day, during which preliminary aeration activates the microorganisms and gradually raises the material temperature to 40–50°C, completing preheating, initial moisture evaporation, and microbial acclimation, thereby laying the groundwork for high-temperature fermentation.
Second layer (middle layer): High-temperature harmless fermentation layer After pre-fermentation is complete, the material automatically descends into the middle chamber and enters a 1–3-day high-temperature fermentation phase. The intelligent system precisely controls aeration rate, temperature, and stirring frequency, achieving sludge detoxification and rapid volume reduction.
Third layer (bottom layer): Cooling and ripening layer : The high-temperature material descends to the bottom layer, completing a 1-day cooling period; the material stabilizes, its moisture content decreases significantly, and the organic matter is essentially decomposed.
Multi-layer cavity materials are used. Progressive downward movement, continuous feeding The process features continuous replenishment of fresh feedstock at the top layer, high-temperature fermentation in the middle layer, and gradual maturation and discharge at the bottom layer, operating without downtime or batch interruptions to enable 24-hour continuous production.
3. Discharge and Secondary Fermentation Processes
The material, after completing in‑tank maturation, is continuously discharged via a sealed bottom‑discharge unit and conveyed to a secondary aging and fermentation yard. There, it undergoes 7–15 days of thorough decomposition, natural temperature stabilization, and dewatering, ultimately yielding compliant, fully matured compost that is sorted and stockpiled for resource recovery.
4. Overall Operating Mode
The entire system adopts PLC fully automatic intelligent operation + regular manual inspections The system operates in a fully automated mode, seamlessly handling the entire process—from feeding and aeration to temperature control, mixing, and discharge. It continuously monitors material temperature and chamber humidity, automatically adjusting aeration rates and mixing frequency to accommodate variations in material properties and seasonal operating conditions. Fermentation tanks are configured in parallel, serving as mutual backups, allowing flexible start‑up and shut-down of individual units or multiple units running at full capacity, depending on sludge treatment volume.
V. Verification of Compliance Between Fermentation System Footprint and Equipment Capacity
1. Land area occupied by the fermentation system
The main fermentation tank facility occupies 320 m², with an accompanying auxiliary area of 100 m². The site layout is compact, and the multi‑level, three‑dimensional tank configuration significantly reduces the footprint, thereby complying with the project’s land‑use planning parameters.
2. Verification of Equipment Capacity Compliance
Equipment configuration: Multi‑stage vertical high‑temperature aerobic fermentation tanks, with each tank’s effective volume sufficient to meet the daily average sludge treatment capacity; parallel operation of multiple tanks enables continuous and stable sludge processing. Taking the fermentation cycle into account, the equipment achieves an effective load factor of ≥90%. Capacity assessment: The number of fermentation units, tank volume, and tiered process design are fully aligned with the project’s planned production scale, and the continuous‑operation mode can fully accommodate the project’s average daily sludge treatment volume, with appropriately sized operational redundancy.
VI. Description of the Aerobic Air Supply System and Exhaust System
1. Aerobic Air Supply System
This project adopts Layered Intelligent Forced-Aeration Air-Intake System Each fermentation tank is equipped with an independent high-pressure variable-frequency turbo blower and a distributed air‑distribution ductwork system, enabling multi‑layer tank‑specific air distribution and precise oxygen control.
Air intake method: Outdoor fresh air is first filtered by a primary filter, then pressurized by a high‑pressure variable‑frequency turbofan and delivered uniformly into the material through evenly distributed aeration micro‑pores at the bottom of the tank, thereby preventing localized oxygen deficiency. The system dynamically adjusts the fan speed in real time based on the oxygen concentration and temperature within the material—increasing aeration during high‑temperature periods to ensure efficient aerobic metabolism, and reducing aeration during cooling and post‑maturation phases to optimize energy efficiency.
2. Exhaust System
The entire fermentation tank system features a fully enclosed, negative-pressure design, ensuring that exhaust gases generated during fermentation are discharged without uncontrolled emissions. All off-gases are collected via a centralized gas‑collection pipeline at the top of the vessel and routed to an exhaust‑gas deodorization system—comprising spray scrubbing and biological treatment—before being released into the atmosphere at compliance with emission standards.
Exhaust gas flow: Water vapor and odorous exhaust gases generated during fermentation in the tank → sealed header at the top → negative-pressure induced draft → waste-gas purification system → compliant emissions. The entire system operates under negative pressure, completely preventing odor leakage and nuisance to nearby residents.
VII. Explanation of Differentiated Operational Modes for Winter and Summer Seasons
1. Summer operating mode (ambient temperature ≥ 25°C)
(1) Temperature Control and Regulation: In summer, ambient temperatures are high, leading to rapid heat accumulation in the feedstock, which can result in overheating and clumping (temperatures exceeding 75°C) as well as microbial deactivation. The system automatically reduces the insulation load, increases the air flow rate of the variable-frequency blower, and enhances ventilation and heat dissipation, maintaining the temperature during the high-temperature phase within the range of 55–68°C. This prevents excessive carbonization of organic matter caused by excessively high temperatures.
(2) Humidity control: In summer, when air humidity is high and the rate of moisture evaporation from the material is slow, appropriately extend the duration of each aeration cycle and increase the frequency of mixing to accelerate the volatilization of water vapor from the compost pile, thereby preventing the material from becoming sticky and compacted.
(3) Odor‑control operation: During the high‑temperature summer months, odor emissions are substantial; increase the exhaust‑air flow rate to boost the operational load of the odor‑control system and prevent the spread of unpleasant odors.
(4) Cycle Optimization: During the summer, microbial activity is high and fermentation proceeds rapidly. By rigorously controlling the duration of each stage, we prevent insufficient exposure to high temperatures from compromising pathogen inactivation and eliminate material losses caused by over‑fermentation.
2. Winter Operating Mode (Ambient Temperature ≤ 10°C)
(1) Thermal Insulation and Heat Storage: In winter, when ambient temperatures are low, the tank is equipped with an insulation layer, and the system activates a low-temperature insulation mode to minimize unnecessary heat loss. Additionally, the aeration rate is appropriately reduced to further curb heat dissipation, ensuring that the material rapidly reaches the high-temperature range.
(2) Microbial Activation: In low-temperature conditions, microbial activity declines. During the pretreatment phase, appropriately adjust the moisture content of the feedstock and increase the carbon-to-nitrogen ratio to enhance microbial metabolism and heat production, thereby ensuring that the temperature remains stable at or above 55°C during the high-temperature phase and guaranteeing effective pathogen inactivation.
(3) Periodic Stability: During winter, the fermentation rate slows down. The duration of each fermentation stage is strictly maintained, with no shortening of the high-temperature or post‑maturation phases. If necessary, the feed rate is slightly adjusted to ensure that the compost reaches the required degree of decomposition and maturity.
Previous Page:
Real-time News
Fudiyuan Engineering Equipment (Henan) Co., Ltd.
Tel:+86-13803783888
Address: No. 14, Hualiang Road, Lankao County Economic and Technological Development Zone, Kaifeng City, Henan Province
Online Consultation